Whirlpool Washer spins SLOWLY even after putting in new clutch - Appliance Repair Forum

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Whirlpool Washer spins SLOWLY even after putting in new clutch Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSQ9010PW6	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

babaasheri		#1 Posted : Tuesday, January 15, 2013 5:24:11 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2013(UTC) Posts: 4		I've replaced the clutch on this washer and it completed two loads successfully with all clothes sufficiently dry, primed for the dryer. Then, I did a load of towels. From afar in the house, I heard a few rhythmic knocks. When the cycle was finished, the towels could have a substantial amount of water rung from them. I ran an empty load to see what was happening. Water fill and drain went well. Agitation was firm and as expected. Then came the spin. It spins, but slowly. Any ideas?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Tuesday, January 15, 2013 6:41:23 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Where did you get the clutch from? If e bay or Amazon, then that is likely the problem. Eric


User Profile View All Posts by User View Thanks

babaasheri		#3 Posted : Tuesday, January 15, 2013 6:45:59 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2013(UTC) Posts: 4		Originally Posted by: fairbank56 Where did you get the clutch from? If e bay or Amazon, then that is likely the problem. Eric This is the one: http://www.amazon.com/dp/B001DP...21431760_3p_M3T1_SC_dp_1


User Profile View All Posts by User View Thanks

babaasheri		#4 Posted : Tuesday, January 15, 2013 6:53:01 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2013(UTC) Posts: 4		So, even though it is said to be a Whirlpool-manufactured product, it is likely a knock-off or something?


User Profile View All Posts by User View Thanks

fairbank56		#5 Posted : Tuesday, January 15, 2013 7:10:06 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Yes, I have seen this many times. People go to buy this $8 piece of junk and it works for just a couple loads or so and fails. Never buy appliance parts from e bay or amazon. Always buy genuine Whirlpool products, or GE or whatever your model is. Here's the one you want. Compare it to the one you bought and you will see and feel the difference. Eric


User Profile View All Posts by User View Thanks

babaasheri		#6 Posted : Tuesday, January 15, 2013 7:13:51 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2013(UTC) Posts: 4		Thanks for the help. I'll pass this purchase by my finance manager in the morning since she's already in bed for the night. At least it is an easy repair.


User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic
Guest

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close