Rank: Member
Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1
|
I have a GE monogram dishwasher that is approx 6 yrs old. It stopped working (you cannot use any control buttons) and there is a high pitch squeal. I took it apart, the the squeal is coming from the module control asm (part no AP3794357) There is a small alarm/speaker on this control board and that is where the sound is coming from. I disconnected all wires going to this assembly, and when I reconnect the power wires, the alarm comes on in a few seconds. My questions are...
1. Is there a way to reset this control panel and make it work again.
2. If not, will replacing this control panel fix the problem, or is the alarm telling me there is a problem on another part.
Thanks for any help you can give me
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/10/2011(UTC)
Posts: 1
|
I have a GE monogram dishwasher that is approx 5-6 yrs old. It stopped working when SCE replaced a transformer in my area (you cannot use any control buttons) and there is a high pitch squeal. I have replaced the main board and I still have the above problem.
1. Is there a way to reset this control panel and make it work again?
2. If not, what seems to be my problem?
Thanks for any help you can give me
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
