|
|
Thank you! Let's do one final test and see if we can pull any error codes from the machine control. The tech sheet with instructions is available below. See if any error codes show during the service mode. Let me know what you find, please. GTWN4950L0WS Tech Sheet
|
|
|
Correct, it won't go thru an entire cycle from filling the tub to spin without me turning it to the setting(and cursing at it in the process)
|
|
|
Oh okay, but it just shuts off after it finishes agitating a wash load set to a regular cycle?
|
|
|
If I set it to the spin/drain cycle it will.
|
|
|
Is that not what it is doing, shutting off before it drains?
|
|
|
Wouldn't that cause it to not drain at all?
|
|
|
Thank you! So the issue likely lies with the main machine control. Have you looked at all the connections in the control panel to see if there are any loose ones? Something may have come loose during transit.
|
|
|
It continues to blink, no pauses. Unless that it considered a pause between the blinks.
|
|
|
No, just remove the front panel and do not start the machine. Just count the number of flashes under that motor cover, please.
|
|
|
SO I need to take the body off the washer and let it run without it to do this?
|
