Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=Gene;83568]Remove the oven floor, the flame spreader and the bottom drawer. Locate the  Bake igniter wire harness plug and unplug it. Check for 120VAC to the igniter while the control calls for Bake. If there is proper voltage then the igniter has to be replaced.

 - The part number for the Bake igniter is [B][URL="http://www.appliancepartspros.com/partsearch/ctrfs.aspx?part_id=4012072&&&model_id=45437&diagram_id=690672"]AP4012072[/URL][/B]

Here are the breakdown diagrams and [url=http://www.appliancepartspros.com/partsearch/model.aspx?diagram_id=690672&&&model_id=45437]Replacement parts for JENN-AIR JGR8850ADB | AppliancePartsPros.com[/url]

Gene.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
Gene	Posted: Thursday, April 30, 2009 11:38:40 AM(UTC)
	Remove the oven floor, the flame spreader and the bottom drawer. Locate the Bake igniter wire harness plug and unplug it. Check for 120VAC to the igniter while the control calls for Bake. If there is proper voltage then the igniter has to be replaced. - The part number for the Bake igniter is AP4012072 Here are the breakdown diagrams and Replacement parts for JENN-AIR JGR8850ADB \| AppliancePartsPros.com Gene.
annemorris	Posted: Thursday, April 30, 2009 9:04:20 AM(UTC)
	I gas oven will not heat up. When I set the Temp. it will not get warm or hot. For awhile it would heat up but very slowly, maybe close to an hour to get to 400! Now it doesn't heat up at all. What part do we need (Igniter)? Could we have a service guide and /:confused: or directions also please?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close