Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=dentdaddy;315175][quote=preplexed;314859]I have on signal on the console. I checked to ensure I had power and the washer was properly plugged in. There are no lights on the control console or the led display. I purchased a new console/led w/membrane but that didn't correct the problem. I have not yet replaced the circuit panel. Would that be the likely problem?[/quote]

 
It is likely the main control board. Expensive, but better than buying a new washer.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
dentdaddy	Posted: Sunday, December 12, 2010 4:28:28 AM(UTC)
	Originally Posted by: preplexed I have on signal on the console. I checked to ensure I had power and the washer was properly plugged in. There are no lights on the control console or the led display. I purchased a new console/led w/membrane but that didn't correct the problem. I have not yet replaced the circuit panel. Would that be the likely problem? It is likely the main control board. Expensive, but better than buying a new washer.
preplexed	Posted: Saturday, December 11, 2010 4:05:42 PM(UTC)
	I have on signal on the console. I checked to ensure I had power and the washer was properly plugged in. There are no lights on the control console or the led display. I purchased a new console/led w/membrane but that didn't correct the problem. I have not yet replaced the circuit panel. Would that be the likely problem?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close