My whirlpool d/w filled the tub & nothing else. The lights on the touchpad pushbuttons work but it won’t restart.
I drained the tub manually & tried it once more. It did refill the tub again but that’s all.
I am mechanically inclined & have tools but am not experienced in d/w-appliance repair.
Any help or tips would be appreciated?
Or where I can find an online service-repair manual?
Thanks, Steve
I found the fuse but when I am not sure if it is good. It reads 0 when I connect my meter to each side.
Does that mean it is good or bad?
If it is good, where to I go from here?
I also checked the door switch, reading is 0.
The float switch reading is also 0.
Thank, Steve