Jeff,
Thanks for the response. The ignitor is not my issue but rather the burner.
https://www.appliancepartspros.com/ge-bake-burner-wb16k10035-ap3205796.html
My issue is getting to the two screws that holds the burner to the wall. There is a very small opening where a 1/4 inch socket will not fit in. I was thinking the heat shield that is underneath may need to be removed which I tried by removing a bunch of screws but it still wouldn’t come out. The alterative I was looking for is what to use to access those two screws holding the burner to the wall in the very small space provided. A 1/4 open end wrench is all that I can think of which I have ordered and hope that will do the trick. With my clumbsy hands I’m bound to drop a screw but will give it a shot. Have a couple of backups just in case.