Dryer runs but will not heat

Dryer Repair
1

As the title suggests, my dryer runs but will not heat. I have checked the following:

heating element, has continuity
Thermal Cut-off, has continuity
Hi-temp thermostat, has continuity
Thermal Fuse, has continuity
Thermistor, does not have continuity (I don’t believe that it should)

Does anyone have any suggestions about what else I could look for?

Also, I have confirmed that I have 240V to dryer while running.

2

Check your service sheet found behind the control panel. Most thermistors at room temperature are 1000 ohms, just measure, if way off replace it.
If ok you just might have a burnt wire somewhere.