Control board on a GE Profile PGS930YP1FS range continues to go out

Control board on a GE Profile PGS930YP1FS range continues to go out.

-The oven will heat up to temperature and then completely turn off after about 20 minutes of baking. The oven completely shuts off and the control board is blacked out and nonfunctional.

-The gas burners work and the fan in the back is blowing air out of the top…from the oven.

-The light works inside.

-We have tried throwing the breaker and unplugging it and still nothing resets it.

-It eventually will turn back on after 30 to 45 minutes.

-Range is only about 5 years old

-Last year(2025) we had the same problem in October and had the control board replaced.(Original only lasted 4 years)

-That one started to have the same problem in July of this year(2026) and had it replaced in September. It’s happening again and that board only lasted a month and a half.

-We had a technician out and he could see that the lights on the display seem to be dimming and getting back to normal and that was during use of the oven.

Just curious if anyone else has experienced this? Are we missing something? Could we have gotten two bad control boards? I have a new control board being shipped but looking for any advice to avoid potentially having to replace a third board in the future.

Just so I know I’m looking at the right thing, what was the part # of the control board that you’ve replaced.

Ok, with the fact it keeps happening and the pace at which it occurs seems to be accelerating my suspect would be the interface harness WB18X28905. The other possibility is the main control board WB27X40227, but I’d find it more likely for that harness to be deteriorating than an issue with the control board.