3 Pages<123 Go to Page...

Water Not Pumping Into The Manifold Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KUDR01TJBL1	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

lkost		#21 Posted : Tuesday, October 11, 2011 2:48:51 PM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2010(UTC) Posts: 26		Originally Posted by: Gene If it's correct and the check valve is missing then you should have plenty of water inside the dishwasher while it's off for a while. Gene. All I really want to know is "where is the check valve located and how do I find it and access it to replace:( :confused:
User Profile View All Posts by User View Thanks

Gene		#22 Posted : Wednesday, October 12, 2011 12:11:16 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The check valve is on the right side of the chopper, a black thing stuck in the housing Read more: http://forum.appliancepartspros...asher.html#ixzz1abHJ3SMR http://forum.appliancepartspros.com
User Profile View All Posts by User View Thanks

lkost		#23 Posted : Wednesday, October 12, 2011 2:19:27 PM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2010(UTC) Posts: 26		Gene , are you talking about the chopper cover or the slot that the right side of the chopper cover fits into. I have no black rubber anywhere so I can't tell where un it goes:(
User Profile View All Posts by User View Thanks

Gene		#24 Posted : Wednesday, October 12, 2011 8:09:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The following is the picture of the check valve. Gene.
User Profile View All Posts by User View Thanks

lkost		#25 Posted : Thursday, October 13, 2011 7:04:55 AM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2010(UTC) Posts: 26		I know what the check valve looks like. I just do not see anyplace where it goes:mad: I believe mine got eaten up so I need to know where to instal the replacement. There seems to be nothing to the right of ther chopper assy where it might go
User Profile View All Posts by User View Thanks

Gene		#26 Posted : Thursday, October 13, 2011 10:01:50 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the attached document. Gene. File Attachment(s): Check valve.doc (59kb) downloaded 3 time(s).
User Profile View All Posts by User View Thanks

lkost		#27 Posted : Tuesday, December 20, 2011 1:57:03 PM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2010(UTC) Posts: 26		:eek: Well, I now have replaced the chopper assy and check valve. Still does not work. Every two weeks I have to clean the chopper screen because it is totally plugged up on both sides. Is the only thing left that could cause this, a non working impeller.Is there any way to check to see if it is working? Wouldn't I need to acess from the bottom to replace?
User Profile View All Posts by User View Thanks

Gene		#28 Posted : Wednesday, December 21, 2011 12:18:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The same ongoing problem after the chopper has been replaced means the impeller is bad. Whirlpool does not sell it separate, so you have to order the whole new motor assembly. The instructions are attached to the reply. - The circulation motor Part number: AP4434021 Gene. File Attachment(s): How to replace pump & motor.pdf (1,122kb) downloaded 2 time(s).
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

3 Pages<123 Go to Page...