Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
palmirage  
#1 Posted : Wednesday, February 24, 2010 10:10:02 AM(UTC)
palmirage

Rank: Member

Groups: Registered
Joined: 2/24/2010(UTC)
Posts: 2

I'm looking for ideas. My frigidaire washer model FTF2140CS1 is 2 years old and barely used(guest house). It just stopped spinning during the rinse cycle and now doesn't agitate or spin. The door lock switch seems to be working. There is no reed switch for the detergent drawer. It pumps water in and out, no filter clogs. Not sure if it's the timer or control board. I hear clicking like it is going through the cycles but because it doesn't spin or agitate eventually it stops and the start light flashes. Tried going into the diagonistic mode to look for error codes, but it won't work. Can't have a service person come out because I'm on a realitively sparsly populated island in the Bahamas. Thoughts? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
palmirage  
#2 Posted : Wednesday, February 24, 2010 1:57:03 PM(UTC)
palmirage

Rank: Member

Groups: Registered
Joined: 2/24/2010(UTC)
Posts: 2

Was finally able to get into diagonstic mode. Error 57. Seems to be speed control board. Is that the same as motor control board? Can't find a part # for a speed control board.
Users browsing this topic
Similar Topics
GE washer will fill and drain but no spin/agitate (Washer Repair)
by Montana_Pete 9/12/2008 9:00:02 PM(UTC)
GE washer will fill and drain but no spin/agitate (Washer Repair)
by corndogg 7/1/2008 9:27:36 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.