Rank: Member
Groups: Registered
Joined: 1/30/2010(UTC)
Posts: 1
|
Help! I have this washing machine that bangs MOST of the time during the spin cycle. When I open the top the tub seems to be leaning back and to the right a little bit. I can move it back to the center, but after a load it moves back to the right/back position. Also during the spin cycle I have lifted the rear of machine up and dropped it back down to ensure the machine is sitting level. Any suggestions?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
You need to take off the cabinet, by pass the lid switch and watch it run. Here is a site that will show you how. Kenmore top loader blues (SublimeMasterJW's Appliance Advice)Check your suspension pads, plate and support structure. If all looks ok, I would replace the springs, it is not an expensive part and it should help. Click on your model number to see exploded views of your base and tub support parts.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
