Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
ljmom24  
#11 Posted : Thursday, December 24, 2009 5:40:19 AM(UTC)
ljmom24

Rank: Member

Groups: Registered
Joined: 12/22/2009(UTC)
Posts: 7

Where is the breaker? Is that different than the high limit switch?
denman  
#12 Posted : Thursday, December 24, 2009 6:54:47 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I was referring to the house breaker
THIS FORUM IS DEAD!!!!!!!
ljmom24  
#13 Posted : Thursday, December 24, 2009 7:13:41 AM(UTC)
ljmom24

Rank: Member

Groups: Registered
Joined: 12/22/2009(UTC)
Posts: 7

Ok...one last question. Apparently when I installed the new bake element, it was touching the body of the oven where it shouldn't be. This created a short (which did not trip the breaker in the house). This in turn affected the clock assembly/control panel (possibly ruining it). So, here's my question: I have taken out the bake element therefore eliminating the short circuit. How do I restore power to the clock assembly/control panel? Or does the fact that there is no display mean that it is ruined? I am not going to purchase a new one because it is a $150 part and I would rather buy a new oven. Thanks for your patience and info!
denman  
#14 Posted : Thursday, December 24, 2009 8:45:51 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
How do I restore power to the clock assembly/control panel?
I would check the power first make sure you have 120 volts from L1 (Black) to Neutral (White) and from L2 (Red) to Neutral
Looks like if the hi-limit opens on this unit it will also kill power to the board so check that first. It uses the L1 side, it also runs the oven light.

Or does the fact that there is no display mean that it is ruined?
If you can confirm that it is getting power and still does not light up then it is toast.

Thanks for your patience and info!
You are welcome. Definitely a bad time of the year for oven problems.

THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (5)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.