Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
jargule  
#11 Posted : Thursday, October 16, 2008 10:01:34 AM(UTC)
jargule

Rank: Member

Groups: Registered
Joined: 10/11/2008(UTC)
Posts: 5

Originally Posted by: Gene Go to Quoted Post
The water flow forces the check valve to open and if any foreign object got stuck there or if the check valve is broken then it would not drain properly.

The drain pimp could make an excessive noise if it runs without water.

Gene.

Tried something out here, I disconnected the drain hose from under the washer and the water drains right out, so it appears the check valve is ok? Though not sure that the flow is strong enough, perhaps partially blocked? Would I have much luck blowing air into the drain the opposite way perhaps, to clear it?
Thanks again for the responses
Gene  
#12 Posted : Thursday, October 16, 2008 2:31:40 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
No, it would not help. Doing that you can make it even worse. If water drains out of the drain pump then the problem could be a bad drain pump or clogged hose.

Gene.
jargule  
#13 Posted : Tuesday, November 11, 2008 4:18:28 AM(UTC)
jargule

Rank: Member

Groups: Registered
Joined: 10/11/2008(UTC)
Posts: 5

The problem is fixed!
It turned out that the drain vent part that connects to the sink was clogged. A 8 dollar part at the hardware store. Saved alot of money not calling a repairman. Thanks!
Newanda  
#14 Posted : Sunday, September 25, 2011 8:42:12 PM(UTC)
Newanda

Rank: Member

Groups: Registered
Joined: 9/25/2011(UTC)
Posts: 1

We have never gotten our whirlpool quiet partner II to work...most buttons light up but that is about it...is it the control panel or the computer to blame?
spgaalaas  
#15 Posted : Sunday, November 18, 2012 11:56:27 AM(UTC)
spgaalaas

Rank: Member

Groups: Registered
Joined: 11/18/2012(UTC)
Posts: 5

I have the blinking clean light 7 times. I have reset it twice, but it keeps coming up. Seems like it is getting hot inside, and I have been starting with hot water as well. what do you think my next step is?:confused:
Users browsing this topic
Guest (3)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.