Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Saturday, March 9, 2019 10:33:58 AM(UTC)

Rank: Member

Groups: Registered
Joined: 3/9/2019(UTC)
Posts: 0
United States
Location: CA

My washing machine doesn't advance ~3/4 through the cycle at a point when the pump starts draining water. The pump drains ok, but the washer doesn't spin as expected. The drain pump continually runs, and the washer would stay in that state forever unless we manually advance the cycle, after which point things are fine.

- There are other points earlier and later the cycle when the washer drains and spins just fine. This is the only time at which the washer stalls.
- Pic of where it stalls in the cycle: Pic of where the washer stalls in the cycle
- This happens on other types of cycles at roughly the same point (e.g. EcoCycle, Heavy Wash).
- The model number is Kenmore 417.43042200

Any tips on what may be wrong? If I can figure out the necessary part, I'll try to fix on my own.

Thank you!

Edited by user Saturday, March 9, 2019 10:34:40 AM(UTC)  | Reason: Not specified

See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.