Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Bikemanz  
#1 Posted : Sunday, November 4, 2018 11:02:19 AM(UTC)
Quote
Bikemanz

Rank: Member

Groups: Registered
Joined: 11/4/2018(UTC)
Posts: 0
United States
Location: GA

I have a Whirlpool washer model number WTW5300vwz. When the water temperature is set to hot, during filling the water comes out warm and sometimes switches over to hot for a few moments. I have changed the water inlet valve assembly with no change. I'm wondering if the washer does not allow straight hot water into it. My wife says the water used to get much hotter. Should the water temp going into the washer be as hot as the temperature of the hot water heater?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
HelloGoodbye  
#2 Posted : Thursday, November 8, 2018 9:37:24 AM(UTC)
Quote
HelloGoodbye

Rank: Member

Groups: Registered
Joined: 11/8/2018(UTC)
Posts: 0
United States
Location: Virgina

I am having the same problem. I taught my previous washer was bad as I replaced the inlet valve on it and no fix. So I bought a brand new whirlpool and the problem still exist. I live in a codo have a hot water heater and hot water gets everywhere else.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.