AppliancePartsPros.com
»
Appliance Repair Help
»
Microwave Repair
»
GE Profile Microwave Turntable Motor Getting Power but not Turning
Rank: Member
Groups: Registered
Joined: 6/10/2018(UTC) Posts: 1
|
I have replaced my GE Profile SpaceMaker JVM3670sf001 microwave’s turntable motor once or twice over the past 10 years without any problem. The previous motor has quit working after 2 years. Now I have tried two new motors and neither will turn when the microwave is turned on. The motor connector shows ~17V when the turn table button is pushed on and 0V when I turn off the turntable button. The light and fan both work just fine.
Any suggestions? Does ~17V sound correct? If 17V is correct then I’m not sure why the motors will not turn since my meter clearly shows 17V at The connector.
Any suggestions would be appreciated since I don’t want to replace an expensive Microwave if it is some minor.
Thanks
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Microwave Repair
»
GE Profile Microwave Turntable Motor Getting Power but not Turning
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close