Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
DJChad818  
#1 Posted : Thursday, October 26, 2017 9:47:20 AM(UTC)
DJChad818

Rank: Member

Groups: Registered
Joined: 10/26/2017(UTC)
Posts: 1

Ok, so here's what's going on:

The washer won't spin or agitate. The motor control board gave me 7 flashes, indicating an open lid switch. I bypassed it with a wire nut, and it worked for one cycle. Same thing again. This time I crimped it, and it worked for one cycle. Same thing again. I verified the circuit was closed, but still had the same 7 flashes, so I replaced the motor assembly, as the tech sheet instructed. It worked for one cycle, and now the same thing again.

Anybody got any ideas? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
brobriffin  
#2 Posted : Thursday, October 26, 2017 11:40:49 AM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781

Replace the lid switch as not only does it detect the lid closed but must also detect the lid being opened after each load.... or it will give you a fault code.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.