Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Thursday, September 21, 2017 6:15:09 PM(UTC)

Rank: Member

Groups: Registered
Joined: 9/21/2017(UTC)
Posts: 1

I replaced the air diffuser (Whirlpool part #w10899382) due to a knocking sound coming from it. That took care of the problem though I'm not sure I did everything properly.
My question is there were two identical wires,one short and one longer, that look like sensors that I wasn't careful enough to pay attention where they go when I took out the old one. The long one I believe was taped to the diffuser
The short one is below the part that goes into the freezer and the long one is connected to wire connection that plugs into the diffuser.
Can someone give me advice on where they go.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Similar Topics
Understanding how an Air Diffuser works (Refrigerator & Freezer Repair)
by fs.dolphin 8/2/2015 6:35:45 AM(UTC)
Air Diffuser replacement (Refrigerator & Freezer Repair)
by g20zoom 6/19/2008 11:24:42 AM(UTC)
air diffuser (Refrigerator & Freezer Repair)
by McFrank 9/28/2007 4:13:26 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.