Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bremja  
#1 Posted : Tuesday, June 21, 2016 7:00:10 AM(UTC)
bremja

Rank: Member

Groups: Registered
Joined: 6/21/2016(UTC)
Posts: 2

My dishwasher won't heat to dry dishes and the element is not hot during various points of the wash cycle. We used a dishwasher cleaner bottle and it didn't get hot enough to melt the wax plug.

Replaced the element a few weeks back, and it currently has a reading of 12.5 when I test for continuity. Just replaced the thermostat. Still no heat.

What's next?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
bremja  
#2 Posted : Thursday, April 5, 2018 8:12:49 PM(UTC)
bremja

Rank: Member

Groups: Registered
Joined: 6/21/2016(UTC)
Posts: 2

Just a follow up to my original post for anyone who might come across this in the future...like I did two years after the first time I ran into the problem (and forgot the solution!).

If the heating element goes out on this machine then the control board is tripped so it stops sending a signal to the element. After you switch out the element you have to reset the control board to get the signal going back to the element. Does this by closing the washer, and then pressing any three keys in the following sequence 1-2-3-1-2-3-1-2-3 with less than a second between key presses.Then you're good to go.
ohm  
#3 Posted : Friday, April 6, 2018 7:14:54 AM(UTC)
ohm

Rank: Member

Groups: Registered
Joined: 7/18/2017(UTC)
Posts: 102

Was thanked: 3 time(s) in 3 post(s)
Yes you do good update! This was his tech sheet for anyone who reads this.
File Attachment(s):
WDF510PAYWA Tech Sheet - W10590887 - Rev D.pdf (844kb) downloaded 4 time(s).

You cannot view/download attachments. Try to login or register.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.