maytag dryer - idler pulley/drum rollers lubrication - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

maytag dryer - idler pulley/drum rollers lubrication Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MDG9606AWW	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

patentable		#1 Posted : Saturday, October 31, 2009 12:45:27 PM(UTC)
Rank: Member Groups: Registered Joined: 10/31/2009(UTC) Posts: 3		Just replaced the idler pulley and drum rollers (and shafts) on this dryer with parts I ordered from you. Question - the old parts seem to have been lubricated at some point in the past. Do the pulley/drum rollers need lubrication? If so, what's a suitable lubricant? Thank you Bob


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Monday, November 2, 2009 4:59:32 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Maytag says to use this stuff. Part number: AP3873855


User Profile View All Posts by User View Thanks

patentable		#3 Posted : Monday, November 2, 2009 9:42:12 AM(UTC)
Rank: Member Groups: Registered Joined: 10/31/2009(UTC) Posts: 3		Is the lubricant used for the bottom of the idler pulley, the idler pulley bearing surfaces, or the dryer rollers/bearing surfaces? Can I use a commercial lube rather than the Maytag part? 3 in 1 oil? 10W? grease? I can't believe that they would use graphite in a dryer handling clothing. Thanks


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Monday, November 2, 2009 11:47:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		The lubricant is used on the roller shafts. I don't think you need lubricant on the other parts, because it can attract lint and slow things down. If you do decide to go that route use a high temp lubricant and not the things you listed.


User Profile View All Posts by User View Thanks

patentable		#5 Posted : Monday, November 2, 2009 1:52:24 PM(UTC)
Rank: Member Groups: Registered Joined: 10/31/2009(UTC) Posts: 3		Sidfink43, Thank you very much for your quick reply. Appreciate it very much. I'll get a high temp lube.


User Profile View All Posts by User View Thanks

Guest		#6 Posted : Saturday, July 31, 2021 9:16:26 AM(UTC)
Rank: Guest Groups: Registered Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		Oil won't last, use grease. Teflon works best.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close