Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Scottginct  
#1 Posted : Saturday, April 18, 2015 6:37:09 AM(UTC)
Scottginct

Rank: Member

Groups: Registered
Joined: 4/18/2015(UTC)
Posts: 1

Spin cycle does not engage.
Replaced clutch assembly and motor coupling.
Wash cycle works but when going into spin it sounds like it is seizing and stops.
I shut it down and unplug, turn off water then it leaks.
I have checked pump and hoses.
Could this be a pump or gearbox issue?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Saturday, April 18, 2015 10:49:58 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
If it won't drain, then it may be something in the pump jamming the motor. With tub empty, set timer directly to spin. If it won't spin, you need to run the machine with cabinet removed and lid switch bypassed so you can observe the clutch hub. When in spin cycle, if the clutch hub is not spinning, pull the pump off the motor and try again. If clutch hub still won't spin, then the transmission is faulty.

Eric

UserPostedImage
Users browsing this topic
Guest (5)
Similar Topics
WHIRLPOOL spin cycle (Washer Repair)
by acce 10/3/2016 5:20:48 AM(UTC)
Whirlpool spin cycle only metallic banging (Washer Repair)
by Mapman1701 10/17/2013 8:22:23 AM(UTC)
Pause in whirlpool spin cycle (Washer Repair)
by golfman 2/12/2011 1:31:58 PM(UTC)
Whirlpool spin cycle noise (Washer Repair)
by Tim1000 8/20/2009 7:41:45 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.