Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
Maytag Washer Water Fill
Options
Go to last post Go to first unread
Model: MAV6000AWQ Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
theunartist  
#11 Posted : Monday, March 30, 2015 12:26:19 PM(UTC)
theunartist

Rank: Member

Groups: Registered
Joined: 3/20/2015(UTC)
Posts: 7
Originally Posted by: fairbank56 Go to Quoted Post
Correct, leave connector unplugged from board.

Eric
Eric - Works like a charm! I assume extra rinse, super wash and auto temp control are the only things affected?

Also, I'm not an electrician but used a small gauge insulated solid wire for the jumps which fit perfectly down the appropriate "holes" on the connector. The only solid size I found was maybe 18 or 20, basically using the same type of wire used on most thermostat systems. Is this sufficient? I'm assuming there is no real 120 watt power going through wires and jumpers but more or less completing a low watt connection/signal...

Thanks, Rick
Back to top
fairbank56  
#12 Posted : Monday, March 30, 2015 4:27:33 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
The only thing that won't work is automatic temperature control and all that does is try to maintain the cold water temp at 75° and the warm water temp at 95°. As for the solid wires, as long as it's a tight fit inside the connector, it should be fine.

Eric
Back to top
Users browsing this topic
Guest (8)
Similar Topics
Maytag Washer water fill solenoid?? (Washer Repair)
by rak7906 2/14/2012 3:32:33 AM(UTC)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET