Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
momoftwynz  
#1 Posted : Monday, October 12, 2009 6:28:01 PM(UTC)
momoftwynz

Rank: Member

Groups: Registered
Joined: 10/12/2009(UTC)
Posts: 1

My dryer quit working completely a few weeks ago. I checked around and found the answer to problem. I replaced the fuse (little white one about 1 1/2" long). That worked for all of 10 minutes and then the dryer quit completely. I changed the fuse in the fuse panel of the house and that didn't seem to work. I checked the plug because on closer review I seen that it was burnt on one of the connections. That seemed to fix the problem for about 3 weeks. Now the dryer will not dry again. It only blows out cold air. I just changed the element and that has not help at all. What else is there that I need to change? Please help me!!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Wednesday, October 14, 2009 6:22:36 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

You need to use a multi meter to check that you have 120v to each side of the connection block. Then unplug the dryer and check continuity on all of the thermostat/thermal fuses. It is likely that thermal fuse again, the long white one but could be others.

The reason that they blow is that there is an obstruction preventing proper air flow. The dryer heats up and the as a safety device they open and shut off the heat or the dryer completely. You need to clean out the lint chute and vent areas completely, including the area inside the blower cover.

Get the air flowing properly and you should be ok after you replace the blown part.

Good luck.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.