Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
notbob  
#1 Posted : Tuesday, September 25, 2012 6:08:20 PM(UTC)
notbob

Rank: Member

Groups: Registered
Joined: 9/25/2012(UTC)
Posts: 8

Maytag Dishwasher
MDBH989AWW2

Runs great for 3 years.
3 days ago lites stay on at 'normal' and 'heated dry' buttons (then I'd just push start) but won't run then after 30 seconds go out.
Same thing over and over.
Recycled power, waited, no change.
Local App guy sells me a $200 control board, this is it for sure.

Remove power, Install board, power back on...same exact thing

Have 110vac to board plug in.
Have 110vac to door switch (com/NO) switch works fine.
Have 110vac to each side thermo button on control board.
No wiring diagram.

Original board was p/n W10250166A
New board is W10298356 physically and connection wise exact same.

But aparently it's not the board

Any help appreciated.
Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
notbob  
#2 Posted : Wednesday, September 26, 2012 7:00:43 AM(UTC)
notbob

Rank: Member

Groups: Registered
Joined: 9/25/2012(UTC)
Posts: 8

Could probly figure it out if I had the wiring diagram or similar diagram.
I see that 70+ people have viewd this post.
Anyone have a wiring diagram?

appreciate the effort, tks!
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.