Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whilrpool washer won't spin or agitate
Options
Go to last post Go to first unread
Model: GSL9365EQ0 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
ljaffe  
#1 Posted : Thursday, September 10, 2009 3:02:42 AM(UTC)
ljaffe

Rank: Member

Groups: Registered
Joined: 9/10/2009(UTC)
Posts: 3
Hi all.

My Whirlpool washer will fill and drain, but will not spin. Also, when filled with water (but without clothes in it) the agitator will rotate slightly but without much force. During the spin cycle I tried to rotate the drum manually, but it would not move. These symptoms appeared suddenly. Within the past two years I have replaced the coupler, dogs, and the pump.

After searching around the forum I have come up with four possible problems:

[LIST=1]
  • Couplers broke again
  • The clutch is shot
  • The brakes seized
  • Something got stuck in the tub
  • The gearecase is bad[/LIST]
    Can someone help me diagnose this down to one or two items?

    Thanks in advance,
    Larry
    		•
    Back to top
    Sponsor
    See inside of your appliance - diagrams and part photos for virtually every model.

    powered by AppliancePartsPros.com     		 
    Back to top  
    ljaffe  
    #2 Posted : Thursday, September 10, 2009 5:26:14 PM(UTC)
    ljaffe

    Rank: Member

    Groups: Registered
    Joined: 9/10/2009(UTC)
    Posts: 3
    I opened up the washer tonight and I found a bunch of nylon fuzz in the vicinity of the coupler. It looks like the center of the nylon part has worn out and is not engaging the gearbox output shaft. I'll replace the coupler and let you know how it goes.

    /l:rolleyes:
    Back to top
    ljaffe  
    #3 Posted : Wednesday, September 16, 2009 5:26:00 AM(UTC)
    ljaffe

    Rank: Member

    Groups: Registered
    Joined: 9/10/2009(UTC)
    Posts: 3
    OK, so I installed the new coupler and the drum spins fine. However, the first load my wife did caused the washer to smell of smoke.

    So what should I check/replace next?

    /larry
    Back to top
    Users browsing this topic
    Guest (3)
    Forum Jump  
    You can post new topics in this forum.
    You can reply to topics in this forum.
    You can delete your posts in this forum.
    You can edit your posts in this forum.
    You cannot create polls in this forum.
    You can vote in polls in this forum.

    Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET