Rank: Member
Groups: Registered
Joined: 7/13/2011(UTC) Posts: 1
|
I need to replace the start relay for the compressor. Does it just snap off? It looks like its connected to the compressor. I'm afraid to just snap it off, dont wnt to damage compressor. The relay part # is AP2113607.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC) Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
You just pry it off with a screwdriver. If metal is arc welded to the compressor pin, you will need to use a dremmel to grind off the metal.If melted on, you can use a propane torch to carefully burn it off
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close