Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Wednesday, February 25, 2009 2:43:21 PM(UTC)

Rank: Member

Groups: Registered
Joined: 2/18/2009(UTC)
Posts: 2

I have a kenmore 80 series that will not agitate. When you first start the cycle it will fill properly but will not agitate. When it is supposed to agitate you can hear a very slight humming noise and then after a few minutes a strong electrical smell comes from below the machine. Eventually the motor overheats and the machine will do nothing. After it cools down you can advance the timer and spin out the water. Is this a motor or timer problem? If its a motor problem can just the swith be replaced on the motor? Also the drive coupler is in good condition and the transmission spins freely in both directions.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.