Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

3 Pages<123>
New Topic Post Reply
Options
Go to last post Go to first unread
-Ronin-  
#11 Posted : Monday, July 11, 2011 8:57:47 AM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

Originally Posted by: richappy Go to Quoted Post
You might have an intermittent defrost thermostat, very common. In addition, your adaptive defrost board might be intermittent. You can try just replacing the defrost thermostat and see if that fixes it. If the defrost thermostat is bulged on the plastic top, that would confirm it's bad.


Sounds good. I'll try replacing the defrost thermostat to see if that does the trick.
-Ronin-  
#12 Posted : Wednesday, July 27, 2011 5:11:48 PM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

So i installed the replacement defrost thermostat and waited for like a week and sure enough frost started to build up in the back of the freezer. I dont think replacing the defrost thermostat is going to resolve the frost buildup problem. What should I do now?
richappy  
#13 Posted : Thursday, July 28, 2011 1:00:08 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Did the fridg go into defrost when you tried the second manual test?
-Ronin-  
#14 Posted : Thursday, July 28, 2011 12:03:26 PM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

I actually didnt try the defrost tests. I just installed the defrost thermostat and hoped that it would work. Should I try the defrost tests again?
richappy  
#15 Posted : Friday, July 29, 2011 1:19:51 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Yes before you initiate the defrost test, remove the back freezer panel and check for defrost heat. If the heater fails to come on in a cold freezer, you have a bad defrost heater.
-Ronin-  
#16 Posted : Friday, July 29, 2011 5:52:38 AM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

Originally Posted by: richappy Go to Quoted Post
Yes before you initiate the defrost test, remove the back freezer panel and check for defrost heat. If the heater fails to come on in a cold freezer, you have a bad defrost heater.


Well I know for a fact that the heater comes on when I unplug the refrigerator, wait like 20 seconds and then plug it back in. After a week or so when the frost builds up i have to remove the panel anyways to ensure that the frost behind the panel is melted.

I did a forced defrost a few days ago and saw the heater get hot and turn red, eventually melting the frost that was built up, so i dont think the heater is bad.

The last time I tried a defrost test was with the old defrost thermostat and only 1 of the 2 methods worked. Any idea what this might mean?
richappy  
#17 Posted : Friday, July 29, 2011 12:21:07 PM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would replace the adaptive defrost board I mentioned before.
-Ronin-  
#18 Posted : Wednesday, August 3, 2011 9:02:54 AM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

Originally Posted by: richappy Go to Quoted Post
I would replace the adaptive defrost board I mentioned before.


Ok I can try that, however if I replace the board and still have the same issue, does this mean that I'm basically out of luck and will have to buy a new refridgerator?

I've replaced the defrost thermostat and now i'll be replacing the adaptive defrost board...could it be something else causing the problem?
richappy  
#19 Posted : Wednesday, August 3, 2011 3:20:23 PM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
All the evidence verifies the wiring is ok, only thing left is the adaptive defrost board.
-Ronin-  
#20 Posted : Thursday, August 4, 2011 5:58:07 AM(UTC)
Quote
-Ronin-

Rank: Member

Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 27

Originally Posted by: richappy Go to Quoted Post
All the evidence verifies the wiring is ok, only thing left is the adaptive defrost board.


Ok I'll give it a shot. Hopefully this will do the trick :confused:
Quick Reply Show Quick Reply
Users browsing this topic
Guest (4)
3 Pages<123>
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.