Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Tuesday, December 23, 2008 7:25:24 AM(UTC)

Rank: Member

Groups: Registered
Joined: 12/23/2008(UTC)
Posts: 2

My front bellow tore apart after 10 years and must be replaced. Of course I went to Sears and they advised to just purchase a new washer, because it would cost too much to replace the bellow. Well, needless to say, the bellow with seals only costs $82.55 w/o shipping. However, my question is - How hard is it to replace the bellow? Any help would be greatly appreciated.:confused:
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Tuesday, December 23, 2008 8:19:39 AM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

It's not that difficult to change the bellows. Attacted is a picture of the door and bellows. There is a small spring #14 and a clamp # 6 which must be removed and reinstalled on the new bellows (aka boot).

I hope this helps you out some.

libertyappl attached the following image(s):
11042926200.jpg (27kb) downloaded 162 time(s).

You cannot view/download attachments. Try to login or register.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.