Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
TOMJK  
#1 Posted : Sunday, October 26, 2008 8:52:49 PM(UTC)
TOMJK

Rank: Member

Groups: Registered
Joined: 10/26/2008(UTC)
Posts: 2

Hello, I have a Kenmore elite dishwasher, approx 4-5 yrs old. We were running it and it stopped at the near end of drain cycle. When we turn on all led lights seem to work, can change from one cycle to another but nothing comes on the display screen has to steady dashes on it but nothing else. Is there a reset for the control panel or some sort of diagnostic mode we can put the dishwasher into to see what might be problem?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, October 27, 2008 1:27:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Remove the bottom panel and look for a pouch with the tech sheets. Post the results.

Gene.
TOMJK  
#3 Posted : Monday, October 27, 2008 6:14:58 PM(UTC)
TOMJK

Rank: Member

Groups: Registered
Joined: 10/26/2008(UTC)
Posts: 2

Hello, thanks for the response took bottom panel off and no paperwork found anywhere, I don't know if this dishwasher was fixed or attempted to be fixed before.
Gene  
#4 Posted : Monday, October 27, 2008 9:51:57 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

According to the tech sheets I found for a similar model, the first failure suspect is the door switch.

- The part number for the door switch is AP3039128

Gene.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.