Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
joelbike  
#1 Posted : Tuesday, September 14, 2010 9:30:25 AM(UTC)
joelbike

Rank: Member

Groups: Registered
Joined: 9/14/2010(UTC)
Posts: 3

First time guy here....... tried to help a neighbor clean the gunk around the edges, and the inner side of the rubber gasket/boot came off, along with the round spring that held it. Is there a technique to get the thing back on? Do I have to disassemble anything? Frigidaire Gallery FWT647GHS0 front load washer.......... Thanks for any help. I don't even know how this site works. Will any help with this just pop up on 'washer repair posts?" I hope I can find it! Joel
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, September 15, 2010 4:17:31 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

joelbike  
#3 Posted : Wednesday, September 15, 2010 10:01:48 AM(UTC)
joelbike

Rank: Member

Groups: Registered
Joined: 9/14/2010(UTC)
Posts: 3

Thanks denman. It looks like I can manage this project. Sure is a nice explanation with photos..........

Joel
joelbike  
#4 Posted : Saturday, September 18, 2010 9:48:23 AM(UTC)
joelbike

Rank: Member

Groups: Registered
Joined: 9/14/2010(UTC)
Posts: 3

To Mr. Denman ,

Mission accomplished. Thanks so much!

Joel
keithl  
#5 Posted : Saturday, May 18, 2013 2:35:13 PM(UTC)
keithl

Rank: Member

Groups: Registered
Joined: 5/18/2013(UTC)
Posts: 1

This link does not seem to work anymore. Please update. I am trying to replace my bellows and having a tough time with the rear spring. I am sure if you have the proper technique it should be easy. I bought the replacement bellows from your company. It came with two plastic devices that appear to be used to hold the spring in place but I have not figured out where to put them [where they will actually stay in place]. I am hoping the manual will shed some light as the included directions are not too helpful in this regard. One more photo would be a huge help.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.