Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
washer drum will not spin
Options
Go to last post Go to first unread
Model: MAV7260BWW Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
craigjr  
#11 Posted : Friday, August 29, 2008 12:37:28 PM(UTC)
craigjr

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 10
well if i engage the cam manually the tub spins. im still puzzled. belt looks good and if i put pressure on motor to tighten belt up and it still will not engage cam.
Back to top
libertyappl  
#12 Posted : Friday, August 29, 2008 12:48:33 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
If you can egage it manually then I'd have to say replace the cam.
Back to top
craigjr  
#13 Posted : Friday, August 29, 2008 12:56:55 PM(UTC)
craigjr

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 10
what stops the cam from engaging? i lean the washer back and with a screwdriver engage it and turn it on and drum spins. stop it and try again bt it self and it will not engage. what makes it engage when it reaches the spin cycle? and cam looks ok. how much would a cam be
Back to top
craigjr  
#14 Posted : Monday, September 1, 2008 4:58:54 AM(UTC)
craigjr

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 10
well i put back together with new pulley. now when the washer goes into first wash the agitator and drum spin. the lower pulley is adjusted correctly. still at a stand still.
Back to top
craigjr  
#15 Posted : Thursday, September 4, 2008 1:59:30 PM(UTC)
craigjr

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 10
anybody have and idea?
Back to top
craigjr  
#16 Posted : Saturday, September 6, 2008 7:43:16 AM(UTC)
craigjr

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 10
anybody have an idea.
Back to top
libertyappl  
#17 Posted : Monday, September 8, 2008 3:16:23 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Sorry was pretty busy around here. Look at #1 on this pictures and make sure your spring is there. Nat
libertyappl attached the following image(s):
mav7260.jpg
Back to top
cw1  
#18 Posted : Thursday, August 13, 2015 4:51:43 PM(UTC)
cw1

Rank: Member

Groups: Registered
Joined: 8/12/2015(UTC)
Posts: 4
I am having a similar problem on my Maytag Ensignia MAV7657. It only spins for a short time at end of wash cycle, does not spin at all during spin cycle. Cleaned/greased motor plate and spring looks good. During spin cycle the motor reverses, the agitator still turns and drum does not spin. When I manually reverse pulley, cam does not turn as transmission shaft just turns in reverse. What keeps the shaft stopped so cam can twist to unlock brake and engage drum to trans? Any diagnostic tips would be appreciated.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Washer Drum will not spin (Washer Repair)
by DoSchultz 7/21/2011 12:31:02 PM(UTC)
washer drum will not spin (Washer Repair)
by hlsjmc1 3/12/2010 4:32:50 PM(UTC)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET