Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
Oven will not heat. We were getting error codes F02 at random. Recently, during baking the oven temp went up to the max by itself and the door locked. We unlocked by turning off the breaker overnight. We also replaced the control unit. The controls work but the oven will not heat.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
:) Thank you! You have been very helpful. We are pulling the oven to check the fuse. Hopefully we can order the part and be back in business before Thanksgiving.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
OK, now we have a new problem. The bake and broil does not heat at all. Elements tested OK. The oven will work on Convection.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
See the attachment for the tech sheet, the old source is no longer available. Here are our parts Replacement parts for WHIRLPOOL KDRP407HSS4 RANGE-DUAL FUEL | AppliancePartsPros.comLooking at the wiring diagram I would say that your control board is shot. Since the convection works correctly you know that power to the unit and it's temperature control is OK. Also that the thermal fuse is OK so that leaves the board. Before replacing it I would check that all the wiring to the elements is OK. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
Thanks, we were afraid that I was the control board. This is the second time it has gone bad. The oven is only 5 or 6 years old.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
The website link to your parts for this Control Panel is broken.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2009(UTC) Posts: 11
|
I can't find the part for the control board in any of the diagrams. And the links to your parts pages do not work.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Cannot explain why the link does not work. I just tried it (open in new tab) and it worked for me. Note: I use Firefox. Perhaps your net security settings are too high.
You could go to the AppliancePartspros parts website and just enter in your model number. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close