|
Hi pcijohn
According to the repair manual to manually unlock the door you have to:
- Unplug washer or disconnect power. - Remove the lower kick panel. - Reach up along the inside of the front and locate the bottom of the door switch/lock unit. - Located on the bottom of the door switch/lock unit is a teardrop shaped tab. - Gently pull the tab down about a 1/4˝ or until a click is heard. - The door may be now opened.
Good luck. Gene.
|
|
Hi fvas The first thing I would check is the belt installed properly. It could came off the pump pulley and stuck between the pulley and the body of the pump.
Good luck. Gene.
|
|
I failed to say, my Maytag is a Model MAVT236AWW, top load. It is ten months old and will not drain after installing a new belt. It just clicks.
|
|
How do I unlock the door. It seems to locked as the result of an F11 code. I can't even unlock the door to figure out which model I have. Any help would be wonderful!
|