Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Gene Posted: Wednesday, August 29, 2007 7:43:07 PM(UTC)
 
Hi pcijohn

According to the repair manual to manually unlock the door you have to:

- Unplug washer or disconnect power.
- Remove the lower kick panel.
- Reach up along the inside of the front and locate the bottom of the door switch/lock unit.
- Located on the bottom of the door switch/lock unit is a teardrop shaped tab.
- Gently pull the tab down about a 1/4˝ or until a click is heard.
- The door may be now opened.


Good luck.
Gene.
Gene Posted: Wednesday, August 29, 2007 7:16:26 PM(UTC)
 
Hi fvas
The first thing I would check is the belt installed properly. It could came off the pump pulley and stuck between the pulley and the body of the pump.

Good luck.
Gene.
fvas Posted: Wednesday, August 29, 2007 9:06:25 AM(UTC)
 
I failed to say, my Maytag is a Model MAVT236AWW, top load. It is ten months old and will not drain after installing a new belt. It just clicks.
pcijohn Posted: Wednesday, August 29, 2007 8:43:22 AM(UTC)
 
How do I unlock the door. It seems to locked as the result of an F11 code. I can't even unlock the door to figure out which model I have. Any help would be wonderful!