Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Gene Posted: Thursday, August 30, 2007 6:02:14 PM(UTC)
 
Karen

You are the best!

Gene.
klt Posted: Thursday, August 30, 2007 2:28:36 PM(UTC)
 
Awesome Gene. You were right on with the water inlet valve. That was the problem. I bought the replacement part, but the two holes don't match up on the water inlet valve metal piece and the holes on the water inlet valve cover. I'm going to have to use big washer and make-do to get two screws to hold the water inlet valve to the cover. I can do it.
Gene Posted: Tuesday, August 28, 2007 8:10:59 PM(UTC)
 
Hi Karen

Here you can find complete instructions:

http://www.repairave.com/washerrepair_wpl_watervalve.asp

Good luck.
Gene.
klt Posted: Monday, August 27, 2007 2:01:42 PM(UTC)
 
Hi Gene,

Hate to bother you again, but how do you go about replacing the Inlet Water Valve on the Washer? Please keep in mind, I don't know anything about washers except how to get them going and stop them.

Thank you for your patience
klt Posted: Monday, August 27, 2007 1:52:15 PM(UTC)
 
Awesome Gene, thank you!
Gene Posted: Monday, August 27, 2007 1:39:00 PM(UTC)
 
In this case there is no doubt the problem is a bad water valve in your washer.

The part number for the new water mixing valve AP3094541

Good luck.
Gene.
klt Posted: Monday, August 27, 2007 1:08:01 PM(UTC)
 
No, no cold water comes out anytime.
Gene Posted: Monday, August 27, 2007 11:43:05 AM(UTC)
 
Hi Karen

I need to know if your washer filled up with cold water for the main wash?

Gene.
klt Posted: Monday, August 27, 2007 7:24:42 AM(UTC)
 
Hi Gene,

I'm having similar problem with washer cycle stopping when it is time for the cold water. Mine also stops during rinse. It is a Kenmore Heavy Duty 70 Series, Model 110.82671810, Serial C73217086. The cold water hose isn't clogged. How do I find out if it is the timer or something else?

Karen
Gene Posted: Sunday, August 26, 2007 1:50:41 PM(UTC)
 
Hi MiniPants

Before I might be able to help you I need to know if your washer filled up with the cold water during the rinse cycle when you used warm/cold or hot/cold options?

Gene.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET