Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
denman	Posted: Tuesday, December 1, 2009 4:30:55 PM(UTC)
	Here are your parts Motor & pump replacement parts for FRIGIDAIRE PLD4375RFC0 Frigidaire/dishwasher \| AppliancePartsPros.com Here is a service manual http://frigidaireservicetips.com/pdfs/463_9.pdf Here is the install sheet http://manuals.frigidaire.com/p...df/Kinston/154427301.pdf Make sure the drain is looped up as in the install sheet. Since the water is skunky it may be that it is being siphoned back into the unit from the drain. Check that the drain is clean. If OK Remove and inspect the drain pump especially the flapper valve if it has one.
	THIS FORUM IS DEAD!!!!!!!
cmccloskey79	Posted: Tuesday, December 1, 2009 3:39:53 PM(UTC)
	Model Number: PLD4375RFC2. Please help!
denman	Posted: Tuesday, December 1, 2009 12:24:35 AM(UTC)
	A Model Number may help others help you.
	THIS FORUM IS DEAD!!!!!!!
cmccloskey79	Posted: Monday, November 30, 2009 12:40:01 PM(UTC)
	I have a Frigidaire 4000 Series Aqua Surge dishwasher. The water won't drain completely upon completion of the cycle -- I lift up the filter and there's 1+ inch of water left in the bottom. As a result, there's a rancid smell from the standing water. I had a repairman come and look at it and he said that the dishwasher was installed correctly, operates correctly, and that there's nothing that can be done. He said it's designed that way. I've had several dishwashers before and this never happened. Any suggestions other than purchasing a new dishwasher?

Notification