Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Post a reply

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
xian67 Posted: Monday, March 29, 2021 12:42:26 PM(UTC)
Hello - Our dishwasher was not starting after selecting the wash settings. The user panel appears to work fine, takes all input. Upon closing the door the start button LED and the LED on the front would just blink, no pattern. Confirmed through diag mode that the door registers open by all the LED's on the panel flashing when open. Upon closing in this mode the LED's stop blinking and go out. I ordered a door latch, but not very confident it will fix the issue. I then looked at the controller board located under the unit to see if the service LED was blinking to cross reference to the technical service guide. The LED is not lit up at all. So now I'm wondering if the controller board under the unit is bad. Any help on this would be appreciated. Thank you.