Customer Support 7 days a week
Shop for Parts
Get Repair Help
Welcome Guest! To enable all features please
Appliance Repair Help
KitchenAid KUDS30IXBLA Dishwasher Not Filling Up With Enough Water
Post a reply
Post a reply
Maximum number of characters in each post is: 32767
[quote=Ed Explains It;920246]I would inspect the level switch and float. Make sure the float slides up and down easily on the post. Make sure you can head the on/off click of the switch. Possibly all it needs is to be cleaded on the inside from built-up gunk. [/quote]
[YOUTUBE]Put YouTube URL in here[/YOUTUBE]
[PART]AP Part Number[/PART]
[HIDE-THANKS=x]The tag hides content from people who have below then X thanks received.[/HIDE-THANKS]
[HIDE-REPLY-THANKS]The tag hides content from people until they either reply in the same thread or press the thank you button for the post.[/HIDE-REPLY-THANKS]
[HIDE-REPLY]The tag hides content from people until they replied in the same thread.[/HIDE-REPLY]
[GROUP-HIDE]Hide the Content from Guests, or other Roles if defined.[/GROUP-HIDE]
[dailymotion]Enter Dailymotion Url (http://www.dailymotion.com/video/xxxx)[/dailymotion]
[HIDE-POSTS=x]The tag hides content from people who have below then X posts.[/HIDE-POSTS]
[GOOGLEMAPS]Enter Google Maps Url[/GOOGLEMAPS]
[ALBUMIMG]Enter a Album Image Number[/ALBUMIMG]
[ATTACH]Enter a Attachment ID[/ATTACH]
[SPOILER]Put Spoiler Text in here[/SPOILER]
[HIDE]This tag hides content from people until they press the thank you button for the post.[/HIDE]
[USERLINK]Put User Name Here[/USERLINK]
[TWITTER]Enter the Status ID of the Tweet you want to embed[/TWITTER]
Enter The Letters From The Security Image:
Last 10 Posts (In reverse order)
Ed Explains It
Sunday, April 4, 2021 10:02:51 AM(UTC)
I would inspect the level switch and float. Make sure the float slides up and down easily on the post. Make sure you can head the on/off click of the switch. Possibly all it needs is to be cleaded on the inside from built-up gunk.
Saturday, February 6, 2021 3:49:58 PM(UTC)
I have a KitchenAid KUDS30IXBLA that doesn't seem to be filling with enough water. It's been making a chugging sound for quite some time and the dishes haven't been getting very clean. I thought this might be due to the control board failing as it's been systematically failing for the last year or so and finally burn't up a few weeks ago. I was lucky enough to find a new control board after much searching, they're very difficult to find. Unfortunately installing the new board didn't fix this problem. So, I decided to stick a camera inside the dishwasher and see what was going on. What I found was that the washer arms were only spinning intermittently, thus the chugging sound.
I've found that if I add a couple glasses of water to the tub the chugging sound quits and the spray arms rotate normally as they should. So I assume it isn't filling up with enough water. It fills just up to the heating element.
I checked the water inlet valve for water flow several times and the flow seemed fairly good, although it did slow down a little once for some reason.
Does anyone have any idea what could be wrong.
Thank you for your help.
Powered by YAF.NET
YAF.NET © 2003-2023, Yet Another Forum.NET