Washer fills and drains fine.
After fill the wash light come on but no agitation occurs.
I searched for possible causes and have done the following:
1) Reset the control board by pausing in wash cycle, then unplug for 1 minute, then plug in and open and close lid rapidly for 12 seconds. Move to spin - nothing happens.
2) Remove front panel and check for blinking LED. In pause it blinked 1 sec on 1 sec off. In wash there was no light.
3) Checked thermal fuse for continuity. Fuse had 100% continuity.
Prior tennant had left a large blanket in the machine.
Please recommend a next step.
Thanks.