Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Post a reply

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Wednesday, September 9, 2015 2:17:15 AM(UTC)
Here are your parts
Parts for GE CDWT980R10SS Dishwasher -

Check across the water valve when it should be filling. If you have 120 volts and it is not filling you have a bad valve.
If there is not 120 volts, check across the overfill switch. If you have 120 volts then the switch is either not activated or it is bad.

If no voltage there either, remove power from the machine and check the wires using resistance from the control board down to the valve/switch combo.

If OK, then odds are that the control board is bad.
Moai Mat Posted: Sunday, September 6, 2015 5:08:45 PM(UTC)
I have a 5 year old GE Cafe dishwasher that will not fill with water. Water inlet valve has been replaced. Float valve seems operational. If I manually add water to the tub and start the machine, it runs through the cycle but will not refill and water does not seem to be jetting out of the arms. Appreciate any suggestions.