Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
denman Posted: Sunday, January 11, 2015 10:25:43 AM(UTC)
 
Depends how it was installed.

Go to the GE appliance website you should be able to find the install sheet.
THIS FORUM IS DEAD!!!!!!!
AnthonyJS02 Posted: Sunday, January 11, 2015 4:25:19 AM(UTC)
 
Thanks for response. Is it pretty easy task pulling the dishwasher out?
denman Posted: Sunday, January 11, 2015 1:19:46 AM(UTC)
 
Here are your parts
Parts for GE GLD5850L15CS Dishwasher - AppliancePartsPros.com

You could undo the drain hose at the disposal and get it to drain onto a pail.
Hold the hose securely in the pail and put a towel etc. over it to stop water splashing all over. This will eleiminate the drain as a possible cause.

If it is still a problem.
You will have to work your way back from the main pump to be sure the drain is clear.
Pay special attention to the flapper valves (items 328 in section 05).
Probably i is best to pull the dishwasher out from the cabinet.

Also check the sump fo any sign of rot. They can develop a crumbly coating on the inside which is the rubber breaking down. If there is any replace the sump as it is a leak waiting to happen.
THIS FORUM IS DEAD!!!!!!!
AnthonyJS02 Posted: Saturday, January 10, 2015 9:12:07 AM(UTC)
 
Hello all stumbled upon this website while trying to figure out why my dishwasher won't drain all way. I have checked drain hose to garbage disposal and have used shop vac to end of hose and sucked out any debris. I have disassembled the sprayer, lock cap(broke the locking tabs) took off filter, unlocked upper sprayer arm and only found little mush in back drain. But still no luck. What would be next step?

Thanks