Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=oldtallman;856754]This morning I disassembled my Vitamix 750 to retrieve the drive socket set screw that had fallen into the machine.
During the disassembly, I inadvertently pulled the red/green/black wires out of their plug that attaches to connector “J1” on the circuit board.
I need the proper orientation of the red/green/black wires into J1 so I can get my blender working again without sending the unit back to Vitamix.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
oldtallman	Posted: Saturday, May 24, 2014 10:53:47 PM(UTC)
	This morning I disassembled my Vitamix 750 to retrieve the drive socket set screw that had fallen into the machine. During the disassembly, I inadvertently pulled the red/green/black wires out of their plug that attaches to connector “J1” on the circuit board. I need the proper orientation of the red/green/black wires into J1 so I can get my blender working again without sending the unit back to Vitamix.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close