Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Gene Posted: Friday, September 25, 2009 5:53:52 PM(UTC)
 
If the ignition switch is bad then:

it would not close the ignition circuit causing the igniters not to spark at all

or

it would not open the circuit when it should, causing the igniters to spark non stop even when the gas (and flame) is off.

Quote:
...It feel like it is not snaping back up when you shut it off...


It can happen if the gas burner valve (#7 or #8 on the diagram) is malfunctioning.

Gene.
ehut1 Posted: Friday, September 25, 2009 3:27:58 PM(UTC)
 
Could the igniter switch on the burner valve be causing the rest of the igniters not to work if it is not popping up in off position? It feel like it is not snaping back up when you shut it off?
Gene Posted: Friday, September 25, 2009 1:03:03 PM(UTC)
 
Sounds like the problem is a bad spark module.

Also, can you be more specific on this problem:
Quote:
...one of the burner knobs has a problem and is not working properly like not popping up fully when you shut it off...


- The spark module Part number: AP2994560
ehut1 Posted: Thursday, September 24, 2009 11:02:00 PM(UTC)
 
All parts are clean and free from grease and rust. No damage to any of the ceramics around ignitors.
Gene Posted: Thursday, September 24, 2009 9:48:20 PM(UTC)
 
Make sure all burners, burners caps and igniters are clean of grease and dry. Check the igniters ceramic part for any damages.

Gene.
ehut1 Posted: Thursday, September 24, 2009 1:40:47 PM(UTC)
 
the next character is 1. kgrt507bwh1 more information in original post

thanks Ehut1
Gene Posted: Thursday, September 24, 2009 12:04:58 PM(UTC)
 
Do all the igniters spark? What is the digit after "H" in the model number?

Gene.
ehut1 Posted: Wednesday, September 23, 2009 12:54:29 PM(UTC)
 
My 14 yr old kitchenaid gas range is slow to lite or won't lite at all, all 4 burners. Is this a problem with spark module or something else? KGRT507BWH1 They all will spark if and when they want to. Could the problem be if one of the burner knobs has a problem and is not working properly like not popping up fully when you shut it off.