Customer Support 7 days a week
Shop for Parts
Get Repair Help
Welcome Guest! To enable all features please
Appliance Repair Help
Oven Repair (including Ranges and Cooktops)
kitchenaid cooktop won't lite
Post a reply
Post a reply
Maximum number of characters in each post is: 32767
[YOUTUBE]Put YouTube URL in here[/YOUTUBE]
[PART]AP Part Number[/PART]
[HIDE-THANKS=x]The tag hides content from people who have below then X thanks received.[/HIDE-THANKS]
[HIDE-REPLY-THANKS]The tag hides content from people until they either reply in the same thread or press the thank you button for the post.[/HIDE-REPLY-THANKS]
[HIDE-REPLY]The tag hides content from people until they replied in the same thread.[/HIDE-REPLY]
[GROUP-HIDE]Hide the Content from Guests, or other Roles if defined.[/GROUP-HIDE]
[dailymotion]Enter Dailymotion Url (http://www.dailymotion.com/video/xxxx)[/dailymotion]
[HIDE-POSTS=x]The tag hides content from people who have below then X posts.[/HIDE-POSTS]
[GOOGLEMAPS]Enter Google Maps Url[/GOOGLEMAPS]
[ALBUMIMG]Enter a Album Image Number[/ALBUMIMG]
[ATTACH]Enter a Attachment ID[/ATTACH]
[SPOILER]Put Spoiler Text in here[/SPOILER]
[HIDE]This tag hides content from people until they press the thank you button for the post.[/HIDE]
[USERLINK]Put User Name Here[/USERLINK]
[TWITTER]Enter the Status ID of the Tweet you want to embed[/TWITTER]
Enter The Letters From The Security Image:
Last 10 Posts (In reverse order)
Friday, September 25, 2009 5:53:52 PM(UTC)
If the ignition switch is bad then:
it would not close the ignition circuit causing the igniters not to spark at all
it would not open the circuit when it should, causing the igniters to spark non stop even when the gas (and flame) is off.
...It feel like it is not snaping back up when you shut it off...
It can happen if the gas burner valve (#7 or #8 on the
) is malfunctioning.
Friday, September 25, 2009 3:27:58 PM(UTC)
Could the igniter switch on the burner valve be causing the rest of the igniters not to work if it is not popping up in off position? It feel like it is not snaping back up when you shut it off?
Friday, September 25, 2009 1:03:03 PM(UTC)
Sounds like the problem is a bad spark module.
Also, can you be more specific on this problem:
...one of the burner knobs has a problem and is not working properly like not popping up fully when you shut it off...
- The spark module
Part number: AP2994560
Here are the breakdown diagrams and
Replacement parts for WHIRLPOOL KGRT507BWH1 | AppliancePartsPros.com
Thursday, September 24, 2009 11:02:00 PM(UTC)
All parts are clean and free from grease and rust. No damage to any of the ceramics around ignitors.
Thursday, September 24, 2009 9:48:20 PM(UTC)
Make sure all burners, burners caps and igniters are clean of grease and dry. Check the igniters ceramic part for any damages.
Thursday, September 24, 2009 1:40:47 PM(UTC)
the next character is 1. kgrt507bwh1 more information in original post
Thursday, September 24, 2009 12:04:58 PM(UTC)
Do all the igniters spark? What is the digit after "H" in the model number?
Wednesday, September 23, 2009 12:54:29 PM(UTC)
My 14 yr old kitchenaid gas range is slow to lite or won't lite at all, all 4 burners. Is this a problem with spark module or something else? KGRT507BWH1 They all will spark if and when they want to. Could the problem be if one of the burner knobs has a problem and is not working properly like not popping up fully when you shut it off.
Powered by YAF.NET
YAF.NET © 2003-2023, Yet Another Forum.NET