Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
Simon / APP Team Posted: Friday, June 22, 2012 2:32:56 PM(UTC)
 
You are very welcome.

Simon.
gypsyqueen Posted: Friday, June 22, 2012 1:43:08 PM(UTC)
 
Ok thank you very much:)
Simon / APP Team Posted: Friday, June 22, 2012 12:27:53 PM(UTC)
 
Yes. You may need the overlay too.

Simon.
gypsyqueen Posted: Friday, June 22, 2012 10:50:06 AM(UTC)
 
So I take it I need both parts? I just noticed while checking the parts link, so the control module is actually the clock/timer? Lol, why dont they just say that the timer is out? It is an 'oven' not a spaceship after all.
Simon / APP Team Posted: Friday, June 22, 2012 10:39:07 AM(UTC)
 
Here are you parts Part number: 316455410
Part number: 316455410


Overlay Part number: 316220700
Part number: 316220700


Thank you.

Simon.
gypsyqueen Posted: Friday, June 22, 2012 10:24:09 AM(UTC)
 
Is the part expensive? Sounds like it shouldnt be to challenging to put on, evenwith broken body parts lol
Simon / APP Team Posted: Friday, June 22, 2012 10:20:03 AM(UTC)
 
Hi.

You can gain the access to the control module by pulling the range out and taking off the control panel rear cover.
Do not forget to unplug the unit.

Thank you.

Simon.
gypsyqueen Posted: Friday, June 22, 2012 10:01:57 AM(UTC)
 
Sorryittook so long to get backwith you but had an accident and broke my clavicle.:( Oven waschecked out before I got to it and was told it is the control module. Is that a difficult repair? Thank you for being patient with me and for your help
gypsyqueen Posted: Thursday, May 24, 2012 11:21:11 AM(UTC)
 
Thanks so much for info and I will post back results. It may be a day or 2 depending on when I can get over to where he is located but I will post back.
Again, thank you, Morgan
Simon / APP Team Posted: Thursday, May 24, 2012 11:08:10 AM(UTC)
 
Hi.

You can ask any questions. I'll do my best to answer. With the oven set for bake check for 120VAC going to the ignitor. If you are getting 120V - replace the ignitor.
If no voltage - unplug the unit and check the oven gas valve for continuity.If it's open - replace it.

The gas valve Part number: 3203459
Part number: 3203459


The ignitor is held by two screws and should not be a problem to replace.

Post the results and questions.

Simon.