Customer Support 7 days a week
Shop for Parts
Get Repair Help
Welcome Guest! To enable all features please
Appliance Repair Help
Oven Repair (including Ranges and Cooktops)
GE Oven error codes
Post a reply
Post a reply
Maximum number of characters in each post is: 32767
[quote=BobChurch;123503]Installed new ERC, got power to it now I'm getting an F2 error code or an F3 when I press broil. :( What now ?[/quote]
[YOUTUBE]Put YouTube URL in here[/YOUTUBE]
[PART]AP Part Number[/PART]
[HIDE-THANKS=x]The tag hides content from people who have below then X thanks received.[/HIDE-THANKS]
[HIDE-REPLY-THANKS]The tag hides content from people until they either reply in the same thread or press the thank you button for the post.[/HIDE-REPLY-THANKS]
[HIDE-REPLY]The tag hides content from people until they replied in the same thread.[/HIDE-REPLY]
[GROUP-HIDE]Hide the Content from Guests, or other Roles if defined.[/GROUP-HIDE]
[dailymotion]Enter Dailymotion Url (http://www.dailymotion.com/video/xxxx)[/dailymotion]
[HIDE-POSTS=x]The tag hides content from people who have below then X posts.[/HIDE-POSTS]
[GOOGLEMAPS]Enter Google Maps Url[/GOOGLEMAPS]
[ALBUMIMG]Enter a Album Image Number[/ALBUMIMG]
[ATTACH]Enter a Attachment ID[/ATTACH]
[SPOILER]Put Spoiler Text in here[/SPOILER]
[HIDE]This tag hides content from people until they press the thank you button for the post.[/HIDE]
[USERLINK]Put User Name Here[/USERLINK]
[TWITTER]Enter the Status ID of the Tweet you want to embed[/TWITTER]
Enter The Letters From The Security Image:
Last 10 Posts (In reverse order)
Wednesday, September 2, 2009 5:58:51 PM(UTC)
The Switch for the door lock may be bad. Disconnect the wires from the switch (if that is not what you already tried) and see if it goes back to work.
I was talking about the oven sensor because F2 means that the oven has over heated. The sensor can cause the code to appear.
[FONT='Times New Roman']
The sensor should be around 1000 ohms at room temperature.
Wednesday, September 2, 2009 7:30:46 AM(UTC)
Which sensor ? The F2 code also shows 'door locked' msg although the door is unlocked. There is a sensor that looks to tie into the door latch so I pulled the wires from that thinking it would open the switch and therefore cause the error to not reappear, not so same result same error code/msg.
Wednesday, September 2, 2009 7:01:59 AM(UTC)
Both of those codes could mean a bad sensor or control you have already replaced the control so replace the sensor.
Range Repair Guide
Tuesday, September 1, 2009 4:51:40 PM(UTC)
Installed new ERC, got power to it now I'm getting an F2 error code or an F3 when I press broil. :(
What now ?
Powered by YAF.NET
YAF.NET © 2003-2021, Yet Another Forum.NET