Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
Coolhand	Posted: Saturday, March 31, 2012 2:42:50 PM(UTC)
	Originally Posted by: Simon / APP Team Hi. Do you need the part number? Yes please.
Simon / APP Team	Posted: Tuesday, March 27, 2012 4:04:53 PM(UTC)
	Hi. Do you need the part number?
Coolhand	Posted: Tuesday, March 27, 2012 3:02:13 PM(UTC)
	It appears that the touchpad membrane is at fault. Thanks,
Coolhand	Posted: Tuesday, March 27, 2012 2:26:36 PM(UTC)
	Originally Posted by: Simon / APP Team Hi. Proceed with the test. It will help you to check the membrane and ERC and relay board. Post the results. The membrane seems to be at fault, Thanks!
Simon / APP Team	Posted: Tuesday, March 27, 2012 10:34:59 AM(UTC)
	Hi. Proceed with the test. It will help you to check the membrane and ERC and relay board. Post the results.
Coolhand	Posted: Tuesday, March 27, 2012 8:20:33 AM(UTC)
	After reading the test instructions, I see that it refers to an F1 error. I have never had F1 as an error. The only display I ever get is F0 or OFF. Does the same test still apply?:confused:
Simon / APP Team	Posted: Monday, March 26, 2012 12:18:39 PM(UTC)
	Hello. You are looking at several possibilities. To find out which part is at fault, please run the test. You will need a multimeter. Please check and post the results. Thank you.
Coolhand	Posted: Monday, March 26, 2012 5:05:13 AM(UTC)
	My Dacor range beeps intermittently and shuts off any oven functions selected. Occasionally I can get the oven to start heating, and it may work for a while, then it beeps and shuts off. Sometimes the panel will say F1 or OFF, sometimes no error code. From reading other posts, I feel as though the main circuit board is at fault, but could there be other things to blame? It would be nice to have an oven again. Is it worth the repair? Is this problem due to heat exposure?

Notification