Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Post a reply
From:
Message:

Maximum number of characters in each post is: 32767
Bold Italic Underline   Highlight Quote Choose Language for Syntax Highlighting Insert Image Create Link   Unordered List Ordered List   Left Justify Center Justify Right Justify   Outdent Indent   More BBCode Tags
Font Color Font Size
Security Image:
Enter The Letters From The Security Image:
  Preview Post Cancel

Last 10 Posts (In reverse order)
mauriceshoemake Posted: Saturday, November 21, 2020 5:57:19 PM(UTC)
 
i have a kenmore elite model number 795.74023.412 i have replaced the capacitor the thermistor and the pcb board my problem is i cant get fridge to cool down all the way like it should its about 7 degrees off it wont hold temp it goes up and down fridge and freezer are doing the same thing fridge about 45 and freezer at about 5 degrees it acts to me like it dont come on when it should but when it does it cools off pretty quick to around 40 i cant get it down to 33 or any colder then 40 any ideas on which way to direct me
jhonbruce Posted: Wednesday, October 7, 2020 10:36:04 PM(UTC)
 
When your fridge is just too heating, you realize it. Food spoils too quickly. Odors arise greater readily. Your sodas are not icy bloodless while you crack them. If you simply hold cranking down the temperature placing however your refrigerator simply may not cool, there are some alternatives for the feasible purpose.
Such as,

1. Over packed or overfilled freezer blockading air waft
2. The evaporator fan is terrible and desires replaced
3. Frost blockading airflow
4. The freezer vicinity desires to be cleaned
5. Defrost machine defective

Most fridges use a fan to transport the bloodless air withinside the freezer into the evaporator after which push it into the refrigerator compartment to hold it cool. The evaporator fan is generally in the back of the again wall of the freezer compartment vicinity. This is what pushes bloodless air into your fridge phase to hold it cool. If piles of boxed frozen meals or something is meddling with the air waft with inside the freezer, you may have a heat refrigerator compartment.

If your refrigerator and or freezer is overstuffed, the bloodless air can't flow into. The air desires to pass freely to flow into and hold gadgets cool. If you've got got an overfilled or grimy refrigerator/freezer, smooth it out, throw a few vintage meals away, and rearrange the cabinets so the air can waft. Once the gadgets aren't blockading the air waft, it needs to take an hour or to get backtrack to the right temperature.

Be positive to test the stream lovers and make sure you may listen to them running. But remember, if any of the components of the refrigerator defrosting machine fails, your freezer may also ice up. This will purpose your freezer to appear bloodless however your sparkling meal phase is just too hot. So you could just do a little troubleshooting as to what component has failed. As said above, the evaporator fan is maximum in all likelihood of the defective component. The strategies given on this web page will paintings for aspect-by-aspect fridges also.

To take a look at to look in case your refrigerator has a defrost difficulty…
1 – Unplug your fridge
2 – Leave the freezer door open for at the least 12 hours
3 – Be positive ground of the freezer is now not bloodless to touch
4 – Plug the fridge again in
5 – If the refrigerator appears to be running well approximately 30 to forty-five mins after plugging it in, it might be a defrost difficulty inflicting your problem
df925 Posted: Sunday, March 29, 2020 11:49:15 AM(UTC)
 
Hello,

I have a PSW23PSRASS and the refrigerator shows 37, however when I put an infrared gun to it it shows between 45-55 throughout the refrigerator compartment. It does show 40 at the grille sensor (thermsistor)

The interesting thing is that by the grille sensor (sensor) is located on the wall that is shared between the refrigerator and the freezer. Right below the grille sensor, is the tube that connects the freezer evaporator with the refrigerator.

That area in the refrigerator section would form ice balls.
Prior to and after installing WR49X10180 (De Ice Ball kit), the temperature still shows above 45.

If I leave the turbo cool on, it seems to be better at keeping the rest of refrigerator at the same temp.

I'm thinking about moving the thermsistor to the middle of back of the fridge, or even all the way to the outer wall.

Thoughts? Anyone else face this issue?

thx
df

reversalact Posted: Tuesday, November 5, 2019 4:28:33 PM(UTC)
 
I'm having the same problem with our Kelvinator refrigerator. It really takes some time before some of the items to cool.
KC lights
nassaubay Posted: Tuesday, December 11, 2018 8:09:21 AM(UTC)
 
Originally Posted by: fieldhouse Go to Quoted Post
Whirlpool Dual evaporator WRX988SIBM03 not cooling properly.

Freezer is fine and the fridge stays around 44 degrees. I have checked the back of the freezer and there is not ice build up at all. The fridge also has what looks like an evaporator cooler as well in the produce area. This area will tend to SLOWLY build up ice. Every week I take it apart to melt with hot water but does not seem to keep fridge any cooler. Both freezer and fridge fans work. I am at a lose. HELP!!!


I am having the exact same problem. Same refer. Same ice build-up in the same place. Mine is just over two years old and has been junk since we got it. Too much to post here, but if you find out how to fix this thing, please let me know.

fieldhouse Posted: Wednesday, November 28, 2018 7:22:08 PM(UTC)
 
Whirlpool Dual evaporator WRX988SIBM03 not cooling properly.

Freezer is fine and the fridge stays around 44 degrees. I have checked the back of the freezer and there is not ice build up at all. The fridge also has what looks like an evaporator cooler as well in the produce area. This area will tend to SLOWLY build up ice. Every week I take it apart to melt with hot water but does not seem to keep fridge any cooler. Both freezer and fridge fans work. I am at a lose. HELP!!!
peterwapel Posted: Thursday, August 9, 2018 9:02:50 AM(UTC)
 
Kenmore Coldspot Model 10659562990.
Freezer fine; Refrigerator warm.
Checked coils, icing, damper, etc., all good.
Problem is that the defrost heaters on the doors are always ON.
Already replaced Defrost Timer. Door heaters are still always on.
I am stuck.
Any thoughts, please?
cowolter Posted: Sunday, May 20, 2018 4:16:01 AM(UTC)
 
Hello !
The Whirlpool Refrigerator was manufactured in 2006. The freezer is on top and is able to keep everything frozen. The refrigerator light works, but I am not sure that I can feel any air blowing and it definitely is not cold. Over the past week or so it has been getting progressively less cold. Also, water is collecting in the bottom underneath the drawers.

I unplugged it and let it sit for a few minutes before plugging it back in. I checked the back and there is sufficient air flow.

Any ideas what can be causing the problem?

What can I check?

Thanks
comcasttechnicalsupport Posted: Friday, May 4, 2018 4:05:37 AM(UTC)
 
such a nice post
denman Posted: Friday, May 4, 2018 3:00:19 AM(UTC)
 
Could be a bad evaporator/freezer fan.

Should be ale to get at it fairly easily.

The following manual may be helpful to you.
https://drive.google.com/drive/f...iBNwRIV4NSEhtV0YxUTRrbTA
Side by Side Refrigerator
5995536439
THIS FORUM IS DEAD!!!!!!!